Wavlink Repeater Login | Ap.setup & 192.168.10.1

Wavlink repeater is one of the smallest networking WiFi devices that connects with the router and repeats its signals to larger area. The setup is simple for which you need to use the interface. this interface can be reached through the ap.setup. We will give you step by step guide to access the ap setup interface and how you can resolve the Wavlink ap.setup not working issues.

So, let’s dive into the Wavlink repeater login guide.

How to Set Up Your Repeater via Ap.setup?

It is easy to set your repeater with the Login URL ap.setup using your computer. To start, you need to plug your repeater in the wall socket and turn it on. It should be powered on inside the reach of the home router. Further, follow the steps given below:

• Plug your extender inside the working the power outlet.
• Power it on and connect a computer with it via Ethernet cable or WiFi.
• Go into any updated web browser and search Ap.setup in it.
• Search it by pressing the Enter button. A login page will show up on the browser.
• Enter the admin default login credentials (username and password), which are given at back label of the repeater.
• An interface dashboard will open up on your computer screen, click Start Setup button.
• On Next page, you need to choose your host router network and enter its password to make a connection between the router and repeater.
• Click Continue, and type in repeater’s new network WiFi SSID credentials, username and password.
• Then, SAVE them and finish the WiFi repeater setup.

At the end, your repeater will restart once. Now, you can connect the devices with the repeater’s network.

Now, if Ap.setup not working issue comes in between the setup process, you should try these troubleshooting tips and solutions.

Why AP.setup Login Not Working?

• Ap.setup Repeater Address not Responding: To resolve make sure that the computer or laptop is connected with the repeater’s network via cable or WiFi, because without that you can’t open the Wavlink ap.setup page.
• Web Browser Showing Errors while Searching Ap.setup: It can happen that your web browser is not updated and need quick update through the settings > about > check for updates.
• Login Page Saying Password is Incorrect: Check the password that you have typed into the password field. If you haven’t changed the password, then look for the default one given on repeater label.
• Connection Issues are Troubling the Ap.setup: Make sure the computer or laptop is connected with the repeater’s network and repeater is connected with the power.

Ap.setup Login Troubleshooting Tips

Change the Admin Password After the Setup

To change the admin password of the Wavlink Ap.setup login interface, you need to access it on your computer. Then go into the administration option and click admin option. Enter the new password. To apply it, just click SAVE option.

Change the WiFi Password

To change the WiFi password, you need to log into the ap setup and select the Wireless Settings. Choose the SSID option, enter the password and click SAVE. Now, you can use this WiFi password to connect with the repeater.

Update the Repeater During the Setup

You should update the repeater while doing the setup if the latest firmware is available. You will find this step after filling and creating the repeater’s network. Just download and install the firmware if available, it will take your 10-20 minutes. After that, you can finish the setup.

Reboot Once a Month

Refreshing the settings and hardware always works when your networking device is facing a lot of bugs and glitches. To reboot the device, find the power button and press it two time.

Reset If Multiple Issues are Troubling the Setup Process

Resetting the ap setup repeater will wipe out all adjusted settings and previous stored data in the repeater. But it is effective if your repeater not working or facing multiple issues. To reset,

• Find and press the RESET pinhole button with a pin or pen.
• To initiate the reset process, long press button for around 10-15 seconds.
• After a few minutes, reconfigure the Wavlink device again with ap setup.

Now, if the ap.setup is not working, what should you do. Don’t worry, instead of URL you can use the repeater IP. Have a quick look to learn how to complete the Wavlink repeater setup through the IP address.

How to Set up Your Repeater via 192.168.10.1?

It is similar to the Ap setup Wavlink repeater setup procedure.

• Link your signal repeater into the power socket and power it on.
• Now, link up your computer or laptop with the repeater via LAN or WiFi.
• Then, open any web browser in your device and search 192.168.10.1.
• Ap.setup login page appear on the screen, enter the default admin login credentials.
• The default login details are given on the back label or inside the user manual of the repeater.
• Enter the credentials and log into the interface. Now, you must select the router network and enter the password.
• On the next page, create the repeater network by entering the username and password, then just finish the setup.

Why 192.168.10.1 Repeater Login Not Working?

• Browser Showing Errors When IP Searched: You have to check that the repeater is connected with the computer or not. Also, make sure that the repeater is on and fully booted.
• Incorrect Username and Password: Double sure the admin login password, you can check the repeater’s back label as well as its user manual.
• Connection Timed Out ERROR: check if the repeater is powered on or not. Also, ensure that the web browser is updated or not, if not update it quickly.
• Wavlink Repeater Setup Not Working: reset and then start configuring the device again. To reset find and press the reset button > hold it for 10 seconds > and start reconfiguring after a few minutes.

Frequently Asked Questions