Wavlink WiFi Disconnection issues occurring in Wavlink extenders and routers may make it hard to work, stream, play games, and utilize the internet every day. This might be because the whole network goes down, a signal drops out, or the speed changes a lot.
This post will provide you some of the easy-to-follow tips on how to prevent your Wavlink WiFi from dropping out, what to do if you’re not able to reach wifi.wavlink.com. We’ll also talk over how to log in to Wavlink and how to fix any little problems that come up.
Why your Wavlink WiFi Disconnects Frequently?
You need to know what’s wrong before you attempt to fix it. Wavlink devices aren’t bad, however a few situations might lead to these frequent connection drops:
- The network is too busy
- Problems with the firmware
- Channel settings that don’t work together
- Security protocols that are wrong
- Settings on gadgets that help them use less power
- A poor signal or anything else getting in the way
- Wrong DHCP Assignment
If you know what the actual problem is, you will be able to address it faster.
1. Update and check the firmware.
The most important thing to do is to update the firmware on your Wavlink router or extender. Older versions of firmware may make things less stable, including WiFi dropping out and the internet lagging.
How to do it:
- Sign in to your Wavlink network.
- Type “192.168.10.1” or “wifi.Wavlink.com” into the address bar of your browser.
- Please type in your username and password now. If nothing is changed, admin/admin is the default.
- Go to System Settings and choose Firmware Update.
- If updates are available, download and install them.
- Updating the firmware may address Wavlink WiFi problems and make it work better.
2. Change the settings for your Wi-Fi network
Bad settings may sometimes make connections drop out at random periods. Here are a few little changes that can have a significant effect:
Change the WiFi channel. When you initially set up a Wavlink router, it normally chooses “Auto” as the channel. This might cause channels to overlap with networks that are nearby. You can also use a free tool like “WiFi Analyzer” to find the channel that is the least crowded and switch to it.
3. Give out IP addresses that don’t change
DHCP servers don’t always send out IPs appropriately when there are a lot of devices connected to Wavlink routers. This makes individuals stop paying attention right away.
Set static IPs for devices you use a lot, such your PC, smart TV, or gaming console.
How:
- To go into the router, navigate to the Wavlink Router login page.
- In the DHCP Settings, click on Client List.
- Find your device’s MAC address and set aside an IP address.
- This keeps the connection steady and eliminates random IP disagreements.
- Adjust power use parameters for devices.
If your Windows laptop’s Wavlink WiFi keeps disconnecting, your network adapter’s power-saving features may be activated.
On Windows:
- Open Device Manager
- Add extra adapters to the network
- Right-click on your WiFi adapter and pick Properties from the menu.
- Click “Manage Power”
- Prevents short Wavlink WiFi disconnection issue by stopping the OS from turning off the WiFi device when not in use.
5. Take your Wavlink device to a different location
To keep the connection steady, where you put your Wavlink extender or mesh node is extremely crucial. If you put it too far away from the main router, backhaul connections won’t work. If it’s too close, it doesn’t work.
Advice on how to get the best position:
- Place the extender halfway between the router and signal-deficient region.
- Keep it away from thick walls, cordless phones, and microwaves.
- Make sure that it receives at least half of the signal from the router.
- Most Wavlink extenders include signal strength LEDs that may assist you figure out where to position them.
6. Restart the device and set it up again.
How to do it?
- Use a pin to push the reset button on the gadget for 10 seconds.
- Wait for the lights to calm down. This usually takes 1 to 2 minutes.
- Connect to the default Wavlink SSID.
- Go to the Wavlink login page and start again with your preferences.
- Sometimes, a clean slate may address issues that are hard to repair, including routing loops or firmware that isn’t set up appropriately.
7. Switch DNS servers
It’s amazing that changing your DNS server may cure problems with stability.
How:
- Log in to your router.
- Under Network Settings, click on DNS Settings.
- This also makes connections better in general and speeds up page loading.
Conclusion
Majority of the time, fixing the problems is as easy as upgrading the firmware, setting things up right, and conducting some basic troubleshooting.
Keep an eye on where your things are and upgrade your router from time to time. Don’t use the program’s built-in settings. You can make most of these adjustments in the Wavlink login panel, so get used to using it.
Frequently Asked Questions
Why does my Wavlink WiFi keep going off every few minutes?
Most of the time, this is because of interference, old firmware, or wrong Wifi settings. To fix this, update the firmware, change the WiFi channels, and set up static IPs.
Is the Wavlink WiFi disconnecting because of a problem with the hardware?
Not too frequently. Wavlink WiFi Disconnection issues are usually caused by settings, interference, or firmware. The hardware itself only breaks down in extremely rare cases.
Can having too many devices cause Wavlink to lose its connection?
Yes, having too many individuals on a network may make connections drop. To make things simpler to manage, cut down on background traffic, give out static IPs, or migrate to a dual-band Wavlink architecture.