WiFi.WAVLINK.com | Ap.setup Setup and Login
The Wavlink extenders, outdoor extenders, mesh WiFi systems and routers are one of the popular networking devices in the world. These devices provide users with so many features and settings that are accessible from the web-based interface.
This platform provides you a complete information about Wavlink setup via Wifi.wavlink.com (for routers) & ap.setup (for extenders).
In between, you will get know about the Wavlink app and its setup, next you’ll learn common issues and their solutions. At the end, troubleshooting tips to make the Wavlink device performance better and seamless.
WiFi.Wavlink.com Router Setup & Login
The Wavlink routers are one of the easiest ways to connect WiFi devices and you can complete the Wavlink router setup in minutes. To do that you have to follow a few steps:
Physical Connection
- Place the router nearby your home modem.
- Use the Ethernet cable to connect the modem’s LAN port with router’s WAN port.
- Now, you can plug the Wavlink router’s power adapter to the wall outlet and turn it on.
It is time to log into the Wavlink setup page on the web and configure its network through your computer.
Wavlink Router Login (WiFi.wavlink.com)
- You have to link up your computer with the Wavlink router network.
- Go to the computer’s WiFi settings and connect with the “Wavlink_XXX” network.
- The network is open so you don’t need to fill the password to the connect.
- Now, choose any browser and search the WiFi.Wavlink.com or Wavlogin.com or waplogin.com or Ip address 192.168.10.1.
- To make sure look at the back label of the router or inside the user-manual of the router.
- A Wavlink login page will appear on the browser, you have to enter the admin login details here.
- The details are given on router’s label or in the user-manual. Use them and click LOGIN.
Inside the interface, you can create the WiFi network by entering the new Wavlink username and password. Then, click Continue button and manage the settings like adjusting the frequency, admin password, or updating the firmware.
At the end of the Wavlink setup, you should wait for the process bar to reach the 100% and then click the Reboot button to complete the setup.
So, this is the Wavlink router login (wifi.wavlink.com) and setup guide. Now, let’s see how to complete the Wavlink WiFi extender setup using the ap.setup within minutes.
Ap.setup Repeater Setup & Login
With the help of few steps, you can setup your new Wavlink extender with home router via WPS or via web-based interface. Let’s see how to do it both ways:
WPS Connection:
- At first, connect your repeater to the power by plugging it in to the power outlet.
- Now, find the WPS button on both of the devices and press it once.
- Wait of the Wavlink extender to show solid light on the POWER LED, means the connection is established.
Now, you can connect with the extended network through router’s WiFi password. If you want to create a separate network then you should set it up from the interface.
Ap.setup Wavlink Login
- Use the laptop/computer to connect with the extender’s WiFi network through the SSID or Ethernet cable.
- Go into any browser and search the ap.setup or waplogin.com or wavlogin.net or IP address 192.168.10.1.
- The Wavlink WiFi extender login page will come up on the screen. Enter the Admin login details to access the interface.
- Use the default admin credentials given on the user manual of the extender. Enter and click LOGIN button.
- The dashboard will appear, here you will be asked to choose the host router network and its password.
- The router will connect with the repeater automatically, and then on the next page you must create the extender own network.
You can keep the same SSID details of router or add new ones. After that, you can manage the settings like admin password change, IP change, or firmware update.
How to Change Wavlink WiFi Password?
You have to access the Wavlink login interface through the wifi.wavlink.com setup or ap.setup. Then go into the Wireless Settings, choose the SSID tab, and enter new password. To apply the password, click SAVE button.
How to Change Wavlink Admin Login Password?
Log into the Wavlink setup page on your computer/laptop. Open the Administration option and select the Admin tab. Enter the new Wavlink admin login password and SAVE it to apply. Now, when you try to log in the interface use this changed password.
How to Update the Wavlink Firmware?
You can manually update the Wavlink firmware from the WiFi.wavlink.com login interface on your computer. Visit the Wavlink official website or fill the form on this platform and download the latest firmware of your Wavlink model. Then, access the interface on your computer and open the Firmware tab. Paste the firmware file and click INSTAL button.
How to Reset Your Wavlink Device?
On the back side of the Wavlink devices, there is a pinhole button. This button is labeled as RESET. You just have to just press it and hold it for 10-12 seconds and release it. After a few minutes, the reset process has been completed and then you have to configure the device again through the Wavlink login interface.
Common Issues: WiFi.wavlink.com & Ap.setup
- WiFi.wavlink.com not Working: Sometimes the WiFi.wavlink.com setup page doesn’t work. In this situation you can use any other like Wavlogin.com or IP address 192.168.10.1.
- Wavlink Setup Page isn’t Loading: The loading stops and browser says ERROR means you are connected to VPN or not connected to the Wavlink network.
- Error in Login Interface Window: You have entered in the interface but it didn’t work correctly. In this case, you should restart the device network by turning it on or off just for once.
- WiFi.wavlink.com login password Error: Make sure the password is correct that you have typed into the Wavlink login window. Or if you have forgot it, resetting the device is best option.
- No internet connection or connection timed out: In this kind of situation, you need to check the Wavlink device is connected to the modem or not. Ensure the ISP is not interfered the internet.
- Unable to connect with WiFi Wavlink router: You have to make sure that you selected the correct network and entered the correct password key for the connection.
Troubleshooting All Common Issues
Use the Non-Damaged Ethernet Cable
The Wavlink routers connects with the modem via Ethernet cable. So, you should use the non-damaged cable to make a connection. Also, make sure you plug the cable’s end properly, no loose ends.
Use the Web-Based Interface for Setup
It is most advisable from the WiFi experts, that you should set the WiFi router or extender from the web-interface. connect computer to the router’s network, go to the browser, search the WiFi.wavlink.com or ap.setup and search it. The interface will open and you can set the device from here.
Change the Admin Password After WiFi.wavlink.com Setup
You have to access the same Wavlink login interface on your computer/laptop. Go into the Administration option, select the admin tab, and enter the new admin password. Then, to apply the admin password, click SAVE the button.
Choose the Optimal Spot for Your Wavlink Device
The WiFi device must be powered on at the optimal location near the home modem or router. The optimal location means there should be no electronic device (microwave oven or cordless phone) should present at the same place or near to the WiFi device.
Reboot the Wavlink Device Once a Month
The reboot process is a sort of refreshing for the WiFi router or extender. You can restart the device by cutting the power and supply it again. There are two ways to reboot the device those are pressing the power button twice or plug in and out the power cord from the wall outlet once.
Frequently Asked Questions
How to Log into the WiFi.wavlink.com?
It is pretty easy to log into the wifi.wavlink.com. You just have to connect your computer to the Wavlink router network. Then, go into the browser and search the WiFi.wavlink.com. A Wavlink login page will come in front of the screen, here enter the admin username and password, then click LOGIN.
How to Access the Ap.setup?
The ap.setup is mostly used to access the Wavlink WiFi extenders. The link will take you to the Wavlink setup page on the web browser. To access it, you have to use the Wavlink admin login credentials.
Can I Set My Wavlink Device with My Phone?
Yes, the Wavlink app will help you to set the Wavlink WiFi network in your house. You will find the app on the Play Store or App Store. First, you have to create the account on the app with your Email ID and then create the Wavlink network.
Where to Relocate the Wavlink Extender?
The extenders must be powered on and connected to the router on the optimal location. The spot must be halfway from the dead internet zones and inside the reach of the router.
Can I Use Ethernet Cable to Connect Wavlink Devices.
Yes, you can choose the LAN cable (Ethernet cable) to connect multiple WiFi device inside your house.