CAN'T ACCESS192.168.10.1?
CHAT LIVE WITH AN EXPERT NOW

192.168.10.1 WiFi Repeater Setup & Login | Troubleshooting Tips

Do you want to set up your WiFi signal repeater with the help of the IP address assigned to it and don’t know how to do it? Don’t worry, we will help you with that.

Here, you will get proper guide to complete the 192.168.10.1 WiFi repeater setup. Not only the setup, all troubleshooting tips from the guidance of experts are also provided here.

How to Set Up WiFi Repeater through 192.168.10.1?

It is the most used way to setup the WiFi signal repeater. You don’t need any URL or app to setup, just the device IP address. It is easy, simple and quick. So, let’s do it:

Physical Repeater Connection

• Now, plug in the repeater into a power outlet and press the power button to turn on the device.
• It will restart the range extender device and then you can log into the device.

Go to the 192.168.10.1 login page

• Connect your device to the repeater’s network.
• You can establish this connection either via LAN cable or by using SSID credentials.
• Use the extender IP address 192.168.10.1 into the address bar of any browser.
• Now, click the Enter button. And you’ll reach the dashboard of the page.
• Here, type the admin login default password to access the login page given on the label of the repeater or in the user manual.
• You will get inside the interface and finish the Wavlink repeater setup easily.

Finish the WiFi Repeater Setup

• Inside the interface, you will be asked for choosing the host router’s network and its password.
• Just type it in and your repeater will connect the router automatically. Then you can proceed to next page.
• On the next page, you need to create a separate repeater network by writing the username and password.
• After that, you should finish the setup by updating the repeater if needed and restarting its network.

After the successful setup of the WiFi repeater, let us know how to reach the login dashboard of the device. This login will allow you access over a lot of additional settings of the device.

How to go to the setup page for the 192.168.10.1 WiFi repeater?

It is easy and we can cover it in just three steps, below are simple instructions to access into the 192.168.10.1 WiFi repeater login page.

Connect Computer with Repeater

Link your computer or laptop with the repeater’s network again, you can do that with the help of the Ethernet cable or WiFi.

Search 192.168.10.1 WiFi Repeater Login Page

Now, open any web browser of your choice in your computer and enter the IP address 192.168.10.1. Search it by pressing the ENTER button. A login page will appear.

Access the WiFi Repeater Login Interface

To access the interface, you need to enter the admin login password. If you haven’t changed that, type the default password given at the back label or in the user manual.

How to Troubleshoot 192.168.10.1 not Working Issue?

• Check Computer is Linked with Repeater: The interface won’t load if the repeater is not connected with the computer via cable or WiFi, so check the connection first and then log into the interface.
• Check the Repeater is Properly Booted: Make sure you have powered the repeater properly and it is fully booted, if not change wall socket and try another one.
• Check Web Browser is Updated: the interface should be accessed on the updated web browser, go into the browser settings > choose About > click Check for UPDATES.
• Check Firewall and AD-blocker is Disabled: ensure your browser’s ad-blocker and computer’s firewall is disabled just during the time of login or setup.
• Reboot the Repeater’s Network and Try Again: Restart the repeater device by pressing the power button twice, and the network will be reboot. Now, you can try login again.

Common Issues with 192.168.10.1 WiFi Repeater login

• Repeater Login Page isn’t Working: It can happen because of the disconnection in between the computer and repeater. So, check and ensure that the devices are connected securely.
• Login Page Detecting Wrong Password: Check you have entered the correct password or if you haven’t changed it yet try the default one as well.
• 192.168.10.1 Login Page is Showing ERROR: Make sure the computer’s antivirus and browser’s ad-blocker are temporary disabled, if not then the window won’t open.
• Browser Saying Connection Timed Out: Reboot the repeater once and connect the computer again to the repeater’s network. After that try again to log into the interface.

Resolving Tips for the WiFi Repeater Login

Change the Admin Login Password

It is advisable by the experts that you should change your admin login password after the setup for security reasons. To change, log into the interface through the 192.168.10.1 IP address and go into the Administration tab. Select the admin option and enter the new admin login password. Then, SAVE the password to apply it.

Make Sure Repeater is Plugged at Optimal Spot

Repeater spot should be at the halfway from the internet dead zone and inside the reach of the host router. Also, do not place any electronic device near to the router or repeater.

Reboot Your Repeater Once a Month

The reboot process helps your repeater to feel fresh and it will wipe out all the bugs and glitches from the device. To reboot or restart the device, you can follow two different methods:

• Find and press the power button on the repeater twice.
• Plug out the repeater’s power adapter from the socket and plug it in again.

Try Reset If Multiple Issues are Occurring

Resetting will clear out all the data along with glitches, technical issues and bugs. Then, you have to re-do the WiFi repeater setup through the 192.168.10.1 on computer. Let’s see how to reset WiFi repeater:

• Find the reset pinhole button at the side of the repeater.
• Press and hold it for 10 seconds, then release it.
• After a few minutes, you can reconfigure the device.

Frequently Asked Questions